|
|
|
|
|
AGR - Products - Polishing - Drum Polisher
|
Drum Polisher
|
 |
|
 |
Drum Polishers are designed for polishing the inside of sink cutouts and drilled holes and are made from the same high quality resin bond as our polishing pads. They are for wet use.
|
Click Image to see larger version.
|
Available for Granite, Marble, Engineered Stone and other stones.
|
Drum Polisher |
Item Number |
Description |
DP50-03 |
Drum Polisher – 50 Grit |
DP100-03 |
Drum Polisher – 100 Grit |
DP200-03 |
Drum Polisher – 200 Grit |
DP400-03 |
Drum Polisher – 400 Grit |
DP800-03 |
Drum Polisher – 800 Grit |
DP1500-03 |
Drum Polisher – 1500 Grit |
DP3000-03 |
Drum Polisher – 3000 Grit |
| CUSTOM |
Please request additional sizes or |
|
Polishing Pad Tips
The proper tool needs to be used when polishing. Most angle grinders operate at too high a speed for proper polishing. High RPM's will burn and stain the surface of the pad, or even cause the pads to fly right off the backer, potentially causing injury. Burning the pads due to high RPM's can cause the pads to wear out quickly and even stain the stone being polished. Wet pads can be used at speeds of up to 4,500 rpm. Dry pads should not be used at over 3,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
| AGR Stone & Tools USA, Inc. has entered into a share exchange agreement with AGR Tools, Inc., a Nevada company listed on the OTC Bulletin Board. If the share exchange closes AGR Stone & Tools USA, Inc. will become a wholly owned subsidiary of AGR Tools, Inc. The share exchange has not closed at this time and there can be no assurance that the share exchange will close. AGR Tools, Inc must issue 46,186,516 shares of its common stock to the current shareholders of AGR Stone & Tools USA, Inc. in order to complete the share exchange. |
|
|
|
|
|
